Smeg FAB32UCRLN User Guide - Page 12

Use To set the refrigerator temperature: 5. Use the refrigerator temperature button (on the right) to set the desired temperature. The symbol (Refrigerator) will be indicated on the compartment display. 6. After approximately 5 seconds of button inactivity, the actual temperature of the compartment will be displayed. The other buttons are disabled when setting. Alarm The alarm sounds to warn of the following: The refrigerator door has been open for more than a minute (continuous buzzer with relative red light on) • Press the alarm button or close the refrigerator door to deactivate the buzzer and switch off the red light. The temperature inside the refrigerator or freezer compartment is too high (intermittent buzzer, flashing display and light on) • Press the alarm button the buzzer. to deactivate • The red light and the flashing temperature on the display turn off automatically when the refrigerator compartment or the freezer compartment reach the previously set temperature. • If the freezer compartment does not reach the required temperature within 24 hours of the alarm being turned off, it will sound again. When the appliance is first turned on, the alarm will not sound for the first 24 hours to allow the appliance to reach the set temperatures. Control lock The control lock is a device that protects the appliance from accidental or inappropriate use. 1. Press the alarm button for 3 seconds to turn on the control lock. The and symbols appear on the displays. 2. Press the alarm button seconds to turn it off. again for 3 3. Press any other button to return to normal viewing of the display. When the control lock is active, only the alarm button is active. 14