Smeg KSM24XU Instruction Manual - Page 10
Chimney assembly
View all Smeg KSM24XU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ELECTRICAL CONNECTION • Remove the cover from the Field Wiring Compartment with a phillips screwdriver. Green Ground • Feed the Power Supply Cable through the electrical knockout. screw Connect the Power Supply Cable to the range- hood cable. At- tach the Power Supply Cable grounding lead to the green screw provided. Attach the White lead of the power supply to the White lead of the rangehood with a twist-on type wire connec- tor. Attach the Black lead of the power supply to the Black lead of the rangehood with a twist-on type wire connector. • Replace the cover. Ground wire Power supply cable Chimney assembly Upper exhaust chimney • Slightly widen the two sides of the upper flue and hook them behind the brackets 7.2.1, making sure that they are well seated. • Secure the sides to the brackets using the 4 screws 12c sup- 2.1 plied. 2 8b Lower exhaust chimney 2.2 • Slightly widen the two sides of the flue and hook them be- tween the upper flue and the wall, making sure that they are well seated. • Fix the lower part laterally to the hood body using the 2 screws 12c supplied. • On the recirculation version, fit the directional grids 8a - 8b in their housings making sure that the directional symbols are to- wards the top and front of the hood. Also make sure that they are correctly inserted in the connection extension pieces 14.1. 7.2.1 12c 8a 12c EN 110