Smeg KSM24XU Instruction Manual - Page 9
Mounting the hood body, Connections
View all Smeg KSM24XU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Mounting the hood body Vr • Before attaching the hood body, tighten the two screws Vr lo- cated on the hood body mounting points. • Hook the hood body onto the screws 12a. • Fully tighten support screws 12a. • Adjust screws Vr to level the hood body. 12a Note: The Hood body should be secured to wall studs. If necessary, install a wood support behind the dry wall, flush mounted between 2 studs. This will provide the necessary structure and support for mounting. Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using a rigid 6" duct. • Install the damper 10 ø 6". 10 • Fix the duct in position using sufficient pipe clamps (not sup- plied). DUCTLESS VERSION AIR OUTLET • Push fit connection 15 onto the hood body outlet. • Insert the connection extension pieces laterally 14.1 in connec- tion 15. • Make sure that the outlet of the extension pieces 14.1 is hori- zontally and vertically aligned with the chimney outlets. If this is not the case, adjust the position by either reversing the connection extension pieces 14.1 and then reassemble as described previously. • Ensure that the activated charcoal filters have been inserted. 15 14.1 EN 9 9