Sony Ericsson Xperia go User Guide - Page 97
Adding the geographical position to your photos, Using still camera settings
![]() |
View all Sony Ericsson Xperia go manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
To turn on smile detection 1 Activate the camera. 2 If the still camera is not selected, drag to . 3 To display all settings, press . 4 Tap Smile detection and select a smile level. To take a photo using smile detection 1 When the camera is open and Smile detection is turned on, point the camera at your subject. Each detected face is framed in the viewfinder (not more than five faces). 2 The camera selects which face to focus on. 3 The face selected appears inside a green frame and the photo is taken automatically. 4 If no smile is detected, tap the screen to take the photo manually. Adding the geographical position to your photos Turn on geotagging to add the approximate geographical location (a geotag) to photos when you take them. The geographical location is determined either by wireless networks (mobile or Wi-Fi® networks) or GPS technology. When appears on the camera screen, geotagging is turned on but the geographical position has not been found. When appears, geotagging is turned on and the geographical location is available, so your photo can get geotagged. When neither of these two symbols appears, geotagging is turned off. To turn on geotagging 1 Activate the camera. 2 If the still camera is not selected, drag to . 3 Press , then tap Geotagging > On. 4 Tap OK to agree to enable GPS and/or wireless networks. 5 Check the options you want to select under My Location. 6 After you confirm your settings, press to return to the camera screen. 7 If appears on the camera screen, your location is available and your photo can get geotagged. If not, check your GPS and/or wireless network connection. Using still camera settings To adjust the still camera settings 1 Activate the camera. 2 If the still camera is not selected, drag to . 3 Tap one of the settings icons on the left of the screen. 4 To display all settings, press . 5 Select the setting you want to adjust, then edit as desired. To customise the still camera settings panel 1 When the camera is open, press to display all settings. 2 Touch and hold the setting you want to move and drag it to the desired position. If you drag the setting outside of the settings panel, the change is cancelled. Still camera settings overview Normal 3D Sweep Panorama Use 3D Sweep Panorama to take wide-angle, panoramic photos of any scene in 3D. Just tap the screen and move the camera steadily from one side to the other. 97 This is an Internet version of this publication. © Print only for private use.
![](/manual_guide/products/sony-ericsson-xperia-user-guide-871e9ed/97.png)