Sony BDP S550 Operating Instructions - Page 30
the HDMI cable, Set the Control for HDMI function - reset
UPC - 027242737518
View all Sony BDP S550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
7 Select a video output resolution for the connected TV, and press ENTER. For details about the video output resolution, see page 45. When you select "HDMI" in step 6 Select from "Auto," "480i," "480p," "720p," "1080i," or "1080p." When connecting the HDMI OUT jack and other video output jacks at the same time, video signals may not output from the jacks, other than from the HDMI OUT jack, when "Auto" or "1080p" is selected. When connecting other equipment at the same time, press RETURN to return to step 6 and change the "TV Connection Method" setting. When you select "Component Video" in step 6 b If the picture is distorted or no picture appears, wait for about 30 seconds without pressing any buttons. The display returns to the resolution setting screen. If the selected video output resolution is incorrect, no picture will appear on the screen when you press any button within that 30 seconds. In this case, press x on the player for more than 10 seconds to reset the video output resolution to the lowest resolution. To change the video output resolution, set "Output Video Format" in the "Video Settings" setup (page 44). 8 Select an aspect ratio that matches your TV, and press ENTER. Select "16:9" when connecting to a widescreen TV or a TV with a wide mode function. Select "4:3" when connecting to a 4:3 screen TV without a wide mode function. 9 (Only when connecting your TV using the HDMI cable) Set the "Control for HDMI" function to "On" or "Off," and press ENTER. Select from "480i," "480p," "720p," or "1080i." When you change the video output resolution, a picture is displayed in the selected resolution for about 30 seconds, then the display asks for confirmation. Follow the on-screen instructions and go to the next step. Select "On" to use the "Control for HDMI" function when connecting Sony components that are compatible with the "Control for HDMI" function (page 16). If you do not use the "Control for HDMI" function, select "Off." 30