Sony BDV-E580 Operating Instructions - Page 48
Calibrating the Appropriate Settings Automatically
UPC - 027242809734
View all Sony BDV-E580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Calibrating the Appropriate Settings Automatically [Auto Calibration] D.C.A.C. (Digital Cinema Auto Calibration) can set the appropriate surround sound automatically. • The system outputs a loud test sound when [Auto Calibration] starts. You cannot turn the volume down. Give consideration to children and neighbors. 1 Press HOME. The home menu appears on the TV screen. 2 Press C/c to select [Setup]. 3 Press X/x to select [Audio Settings], then press . 4 Press X/x to select [Auto Calibration], then press . The confirmation display for [Auto Calibration] appears. 5 Connect the calibration mic to the A.CAL MIC jack on the rear panel. Set up the calibration mic at ear level using a tripod, etc. (not supplied). The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. 48US ECM-AC2 A.CAL MIC Calibration mic 6 Press X/x to select [OK]. To cancel, select [Cancel]. 7 Press . [Auto Calibration] starts. The system adjusts the speaker settings automatically. Be quiet during the measurement. • Before [Auto Calibration], make sure that the surround amplifier turns on and you install the surround amplifier in the appropriate location. If you install the surround amplifier in an improper location, such as another room, proper measurement will not be obtained. 8 Confirm the conclusions of [Auto Calibration]. The speakers connected to the unit are listed as [Yes] on the TV screen. • If measurement fails, follow the message then retry [Auto Calibration]. • The measurement for [Subwoofer] is always [Yes] and [Speaker Settings] returns to the default setting when you perform [Auto Calibration].