Sony BDV-IT1000ES Operating Instructions - Page 40
Remove the rear cap using the wrench supplied, and remove the speaker pedestal - bdv is1000
UPC - 027242731103
View all Sony BDV-IT1000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Getting Started BDV-IS1000 1 Prepare screws (not supplied) that are suitable for the holes of the bracket. 2 Secure the bracket to the wall using hole 1. 1 2 34 Tip • To prevent the speaker from rotating, use the hole 2, too. 3 Remove the rear cap using the wrench (supplied), and remove the speaker pedestal using a screwdriver (+) (not supplied). Wrench (supplied) Rear cap Screw Note • The removed screw is used in a later Step. Be sure not to lose the screw. 40US
40
US
Getting Started
BDV-IS1000
1
Prepare screws (not supplied) that are suitable for the holes of the bracket.
2
Secure the bracket to the wall using hole
1
.
Tip
• To prevent the speaker from rotating, use the hole
2
, too.
3
Remove the rear cap using the wrench (supplied), and remove the speaker pedestal
using a screwdriver (+) (not supplied).
Note
• The removed screw is used in a later Step. Be sure not to lose the screw.
1
3
4
2
Rear cap
Wrench (supplied)
Screw