Sony BRCZ330 Operating Instructions - Page 15
Remote Commander (supplied)
View all Sony BRCZ330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Overview Notes • Set the switches before you turn on the power of the camera. • You cannot use a camera with its camera address set to "0" together with cameras with their camera address set to "1" to "7." Remote Commander (supplied) 1 2 3 4 5 POWER CAMERA SELECT 1 2 3 AUTO FOCUS MANUAL FAR NEAR DATA SCREEN BACK LIGHT STD REV 123 456 PRESET RESET POSITION PAN-TILT HOME PAN-TILT RESET SLOW ZOOM FAST TT W L/R DIRECTION SET W RM-EV100 6 7 8 9 q; A CAMERA SELECT buttons Press the button corresponding to the camera you want to operate with the Remote Commander. The camera number can be set using the IR SELECT switch on the rear of the camera. Note If two or more cameras are adjacent and have the same camera number, they are operated simultaneously with the same Remote Commander. When you install the cameras close to each other, set different camera numbers. For the camera number setting, see "Operating Multiple Cameras with the Remote Commander" on page 33. B FOCUS buttons Used for focus adjustment. Press the AUTO button to adjust the focus automatically. To adjust the focus manually, press the MANUAL button, and adjust it with the FAR and NEAR buttons. C DATA SCREEN button Press this button to display the main menu. Press it again to turn off the menu. If you press the button when a lower-level menu is selected, the display returns to the next menu one level higher. Note Pan/tilt and zoom operations are disabled when the menu is displayed. D PAN-TILT buttons Press the arrow buttons to perform panning and tilting. Press the HOME button to face the camera back to the front. When the menu is displayed, use V or v to select the menu items and B or b to change the set values. E L/R DIRECTION SET button Hold down this button and press the REV button to change the direction of the camera movement opposite to that indicated by the arrow of the B/b buttons. To reset the direction of the camera movement, press the STD button while holding down this button. F POWER switch Press this button to turn on/off the camera when the camera is connected to an AC outlet. G BACK LIGHT button Press this button to enable the backlight compensation. Press it again to disable the backlight compensation. H POSITION buttons Hold down the PRESET button and press button 1 to 6 to store the current camera direction, zooming, focus adjustment and backlight compensation in the memory of the pressed number button. To erase the memory contents, hold down the RESET button and press button 1 to 6. I PAN-TILT RESET button Press this button to reset the pan/tilt position. J ZOOM buttons Use the SLOW button to zoom slowly, and the FAST button to zoom quickly. Press the T (telephoto) side of the button to zoom in, and the W (wide angle) side to zoom out. 15 Location and Function of Parts