Sony BRCZ330 Operating Instructions - Page 33

Operation Using the Supplied Remote Commander Zooming Press either of the ZOOM buttons. Subject appears farther away. (Wide angle) Zooms in or out slowly (SLOW side) PAN-TILT RESET SLOW ZOOM FAST TT W L/R DIRECTION SET W RM-EV100 Subject appears closer. (Telephoto) Zooms in or out fast (FAST side) Note When you perform pan/tilt operation while the camera is in the telephoto mode, the moving speed of the image on the screen may be a little jerky. Operating Multiple Cameras with the Remote Commander 1 Set the IR SELECT switch on the rear of the camera you want to operate to 1, 2 or 3. IR SELECT 1 2 3 2 Press the CAMERA SELECT button on the Remote Commander that corresponds to the number set in step 1. POWER CAMERA SELECT 1 2 3 AUTO FOCUS MANUAL FAR NEAR DATA SCREEN BACK LIGHT CAMERA SELECT Then, you can operate the camera(s) specified by number. Every time you operate the camera(s) using the Remote Commander, the CAMERA SELECT button pressed in step 2 lights. Adjusting the Camera AUTO FAR POWER NEAR CAMERA SELECT 2 1 FOCUS 3 MANUAL NEAR BACK LIGHT MANUAL FAR AUTO DATA SCREEN 3 REV 2 6 STD RESET 1 4 5 PRESET POSITIOPNAN-TILT HOME BACK LIGHT PARNE-TSIELTT FAST ZOOM T T SLOW W W RM-EV100 DIREL/CRTION SET Focusing on a Subject To focus the camera on a subject automatically Press the AUTO button. The camera focuses on the subject at the center of the screen automatically. To focus the camera on a subject manually After pressing the MANUAL button, press either the FAR or the NEAR button to have the camera focus on the subject. Focusing on a far subject Focusing on a near subject CAMERA SELECT 1 2 3 AUTO FOCUS MANUAL FAR NEAR DATA SCREEN BACK LIGHT 33 Adjusting the Camera