Sony BRCZ330 Operating Instructions - Page 43
Installation and Connections, Installation, Attaching an Output Card, Installing the Camera
View all Sony BRCZ330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installation and Connections Installation 2 Insert an optional Output Card into the card slot. Align both ends of the Output Card with the sliders inside the slot, then insert the board securely as far as it will go. Attaching an Output Card Attach an Output Card (not supplied) to the card slot on the rear of the camera. 1 Loosen the two screws to remove the card slot cover. BRBK-HD2 (not supplied) 3 Tighten the two screws on the Output Card. Installation and Connections To remove the Output Card Loosen the two screws on the Output Card and pull the board out straight and slowly. Installing the Camera To install the camera on a desk Place the camera on a flat surface. 43 Installation
Installation and Connections
Installation
43
Installation and Connections
Installation
Attaching an Output Card
Attach an Output Card (not supplied) to the card slot on
the rear of the camera.
1
Loosen the two screws to remove the card slot
cover.
2
Insert an optional Output Card into the card slot.
Align both ends of the Output Card with the sliders
inside the slot, then insert the board securely as far
as it will go.
3
Tighten the two screws on the Output Card.
To remove the Output Card
Loosen the two screws on the Output Card and pull the
board out straight and slowly.
Installing the Camera
To install the camera on a desk
Place the camera on a flat surface.
BRBK-HD2
(not supplied)