Sony BT50 Operating Instructions - Page 16
Calling, Make the Bluetooth - dr manual
UPC - 027242706798
View all Sony BT50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Calling Multi function button POWER button VOL + button VOL - button Check the following before operating the unit. - The Bluetooth function is active on the mobile phone. - Pairing of this unit and the Bluetooth mobile phone is complete. 1 Press and hold the POWER button for about 3 seconds while the unit is turned off. The indicator (blue) and indicator (red) flash together twice, the unit turns on and then this unit tries to connect to the last Bluetooth mobile phone that was used. Note Do not press and hold the POWER button for more than 7 seconds, otherwise pairing mode is entered. Tip This unit will stop trying to connect to the Bluetooth mobile phone after 1 minute. In such a case, press the multi function button to try to connect again. When this unit does not connect to a Bluetooth mobile phone automatically You can make a connection by operating Bluetooth mobile phone or by operating this unit to connect the last connected Bluetooth device. A To make a connection by operating Bluetooth mobile phone 1 Make the Bluetooth connection (HFP or HSP*) from the Bluetooth mobile phone to this unit. Refer to the manual supplied with your Bluetooth mobile phone for operation details. The list of recognized devices appears on the display of the Bluetooth mobile phone. This unit is displayed as "DR-BT50." When you use the Bluetooth mobile phone features both HFP (Hands-free Profile) and HSP (Headset Profile), set to HFP. Note When connecting to a Bluetooth mobile phone which is different from the last connected one, make the connection following the above procedure. * For details on profiles, see page 23. 16