Sony BT50 Operating Instructions - Page 17

B To make a connection with the last connected Bluetooth device by operating this unit 1 Press the multi function button. The indicator (blue) and indicator (red) start flashing at the same time, and the unit performs the connection operation for about 5 seconds. Note When listening to music with this unit, a Bluetooth connection cannot be made with the multi function button. To call 1 Use the buttons on your mobile phone when making a call. If no dial tone is heard on this unit, press and hold the multi function button for about 2 seconds. Tip You can call in the following way, depending on the Bluetooth mobile phone. Refer to the manual supplied with your mobile phone on operating details. - When not communicating, you can call using the voice-dial function by pressing the multi function button. - You can call the last dialed number by pressing the multi function button for about 2 seconds. To receive a call When an incoming call arrives, a ring tone will be heard from the unit. 1 Press the multi function button on the unit. The ring tone differs in the following ways, depending on your mobile phone. - ring tone set on the unit - ring tone set on the mobile phone - ring tone set on the mobile phone only for Bluetooth connection Note If you received a call by pressing the button on the Bluetooth mobile phone, some Bluetooth mobile phones may have handset use priority. In this case, set to talk with the unit by pressing and holding the multi function button for about 2 seconds, or by operating the Bluetooth mobile phone. For details, refer to the manual supplied with your Bluetooth mobile phone. To adjust the volume Press the VOL + or - button. Tips • You cannot adjust the volume when not communicating. • Volume level for calling and listening to music can be set independently. To terminate a call You can end a call by pressing the multi function button on the unit. To stop use 1 Terminate Bluetooth connection by the Bluetooth mobile phone. 2 Press and hold the POWER button for about 3 seconds to turn off the power. The indicator (blue) and indicator (red) light up together, and the unit turns off. Continued 17