Sony CCD-FX530 Primary User Manual - Page 41

Removing, Inside, Viewfinder

Page 41 highlights

Removing Dust from Inside the Viewfinder (1) While holding down the switch on the viewfinder barrel, turn the eyecup in the direction of the arrow and pull it out. (2) Remove the small lens from inside the viewfinder. (3) Clean the surface with a commercially available blower. 2 0 0 rTh C j •. To Reattach the Eyecup (1) Replace the small lens inside the viewfinder. Be sure to replace it with the correct side. (2) Align the groove on the eyecup with the • mark on the barrel. (3) Turn the eyecup clockwise. e 1 2 3 Camcorder Operation • Operate the camcorder on 6.0 V (battery pack) or 7.5 V (AC power adaptor). • For DC or AC operation, use the accessories recommended in this manual. • Should any solid object or liquid get inside the casing, unplug the camcorder and have it checked by Sony dealer before operating it any further. • Avoid rough handling or mechanical shock. Be particularly careful of the lens. • Keep the POWER switch set to OFF when not using the camcorder. • Do not wrap up the camcorder and operate it since heat may build up internally. • Keep the camcorder away from strong magnetic fields or mechanical vibration.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

Removing
Dust
from
Inside
the
Viewfinder
(1)
While
holding
down
the
switch
on
the
viewfinder
barrel,
turn
the
eyecup
in
the
direction
of
the
arrow
and
pull
it
out.
(2)
Remove
the
small
lens
from
inside
the
viewfinder.
(3)
Clean
the
surface
with
a
commercially
available
blower.
2
•.
0 0
rTh
C
j
To
Reattach
the
Eyecup
(1)
Replace
the
small
lens
inside
the
viewfinder.
Be
sure
to
replace
it
with
the
correct
side.
(2)
Align
the
groove
on
the
eyecup
with
the
mark
on
the
barrel.
(3)
Turn
the
eyecup
clockwise.
e
1
2
3
Camcorder
Operation
Operate
the
camcorder
on
6.0
V
(battery
pack)
or
7.5
V
(AC
power
adaptor).
For
DC
or
AC
operation,
use
the
accessories
recommended
in
this
manual.
Should
any
solid
object
or
liquid
get
inside
the
casing,
unplug
the
camcorder
and
have
it
checked
by
Sony
dealer
before
operating
it
any
further.
Avoid
rough
handling
or
mechanical
shock.
Be
particularly
careful
of
the
lens.
Keep
the
POWER
switch
set
to
OFF
when
not
using
the
camcorder.
Do
not
wrap
up
the
camcorder
and
operate
it
since
heat
may
build
up
internally.
Keep
the
camcorder
away
from
strong
magnetic
fields
or
mechanical
vibration.