Sony CCD TR818 Operating Instructions - Page 44
Using the built-in light, Replacing the bulb, Purchase the Sony XB-3D halogen lamp.
UPC - 027242584433
View all Sony CCD TR818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Using the built-in light Replacing the bulb Use the Sony XB-3D halogen lamp (optional). The supplied halogen lamp is not on the market. Purchase the Sony XB-3D halogen lamp. Remove the power source before replacing the bulb. (1) Remove the built-in light unit while pushing the hole under the built-in light unit using a wire. (2) Turn the bulb housing counterclockwise and detach from the built-in light unit. (3) Replace the bulb using a dry cloth. (4) Attach the bulb housing turning it clockwise, then replace the built-in light unit. 1 2 3 CAUTION •When replacing the bulb, use only the Sony XB-3D halogen lamp (optional) to reduce the risk of fire. •To prevent possible burn hazard, disconnect the power source before replacing and do not touch the bulb until the bulb becomes cool enough to handle (for about 30 minutes or more). Note To prevent the bulb from being smudged with finger prints, handle it with a dry cloth, etc. If the bulb is smudged, wipe it completely. 44