Sony CDP-CX400 Operating Instructions - Page 17

Playing CDs 4 Push the JOG dial. The disc being programmed Playing order 2nd NEXT DISC ART. HIT TRACK GROUP ART. MIN STEP SEC *DISC-20***** ALL 1 DISCS SHUFFLE REPEAT 1 GROUP PROGRAM 1 2 3 X-FADE DELETE MULTI CD TEXT NO DELAY CD1 CD2 CD3 The track being programmed 5 To program other discs/tracks, do the following: To program All tracks of another disc(s) Other tracks on the same disc Other tracks on other discs Repeat Step(s) 2 and 4 3 and 4 2 to 4 6 Press H to start Program Play. To cancel Program Play Press CONTINUE. z The programs remain even after Program Play ends When you press H in Program Play mode, you can play the same program again. z When you press PROGRAM to select Program Play during Continuous or Shuffle Play The program is played after the current track. z The program remains until erased Even if you replace discs, the programmed disc and track numbers remain. Therefore, the player will play the new disc and track numbers. However, the programmed disc and track numbers that are not found in the player or on the disc are deleted from the program, and the rest of the program is played in the programmed order. z You can select the program number (PROGRAM 1,2, or 3) by using the remote Z Press PROGRAM on the remote repeatedly until the desired program number appears in the display. Note If you select Group Play mode (on page 26), Artist Play mode (on page 28), or Hit List (on page 29), Program Play will be canceled. Checking the programmed order You can check your program before or after you start playing. Press CHECK. Each time you press this button, the display shows the disc and track number of each step in the programmed order. (When a whole disc is programmed as one step, "AL" appears instead of the track number.) After the last step in the program, the display shows "- END -" and returns to the original display. Changing the programmed order You can change your program before you start playing. To You need to Erase a track or disc Press CHECK until the track or disc you don't want appears in the display, then press CLEAR. Erase the last track or disc in the program Press CLEAR. Each time you press the button, the last programmed track or disc will be cleared. Add tracks or discs to the end Follow the programming of the program procedure. Erase the whole program completely Hold down CLEAR until "CLEAR" appears in the display to erase the whole program, then create a new program following the programming procedure. Erasing the program stored in memory 1 Press PROGRAM repeatedly in stop mode until the program number (PROGRAM 1, 2, or 3) you want to erase appears in the display. 2 Press and hold CLEAR until "CLEAR" appears in the display. 17