Sony CDP-CX400 Operating Instructions - Page 6

Getting Started Connecting Another CD Player If you have a Sony CD player in which 5, 50, 200, 300, or 400 discs can be inserted and which is equipped with the CONTROL A1 (or CONTROL A1) jack and the command mode of that player can be set to CD 3, you can control that player as the second player with this player. After connecting this player and an amplifier, follow the procedure below. Be sure to turn off the power of each player before making this connection. To ANALOG OUT CDP-CX400 To 2ND CD IN To an AC outlet To audio output CDP-CX235, etc. To CONTROL A1 To an AC outlet To audio input Amplifier : Signal flow To an AC outlet What cords will I need? • Audio cord (1) (Use the cord supplied with the player to be connected.) • Monaural (2P) mini-plug cord (1) (supplied for Canadian models only) 1 Connect the players with an audio cord (see also "Hookups" on page 5). CDP-CX400 L L R R IN 2ND CD OUT ANALOG CDP-CX235, etc. LINE OUT L R 2 Connect the players with a monaural (2P) mini- plug cord. CDP-CX400 CDP-CX235, etc. CONTROL A1 CONTROL A1 For details on this connection, refer to the supplementary "CONTROL A1 Control System" instructions. 3 Set the command mode of this player to CD1 (factory setting) or CD2, and set that of the second player to CD3. Check the display for the current command mode of this player, if the mode is CD3, change the mode as described on the next page. 2nd NEXT DISC ART. HIT TRACK GROUP ART. MIN STEP SEC *DISC-1****** ALL 1 DISCS SHUFFLE REPEAT 1 GROUP PROGRAM 1 2 3 X-FADE DELETE MULTI CD TEXT NO DELAY CD1 CD2 CD3 Current command mode For details on how to operate the second player, see "Controlling Another CD Player" on page 31 and "Playing Alternately" on page 32. 4 Connect the AC power cord of both players to an AC outlet. 6