Sony CDX-C780 Primary User Manual - Page 12

Adding tracks to a program 1 Press (SHIFT), then press (4) (PLAY MODE) for two seconds. TRACK PLAY MODE ENTER "P 1 " shows Program 1 is selected. To select Program 2, press (5) (n) repeatedly until "P 2" appears. 2 Press (2) (N) or (5) (n) to select the track slot number where you want to insert a track. Track slot number TRACK PLAY MODE ENTER 3 Push the SEEK/AMS control up or down EN to select the track you want to insert. 4 Press (6) (ENTER) momentarily to enter the track. The current track in that slot number and the succeeding tracks shift down. 5 To continue inserting tracks, repeat steps 2 through 4. Note Once all 12 slots have been filled, "*Mem Full*" appears in the display, and you cannot insert tracks. 6 When you finish inserting tracks, press (4) (PLAY MODE) for two seconds. 7 Press (SHIFT). Erasing tracks in a program 1 Press (SHIFT), then press (4) (PLAY MODE) for two seconds. TRACK PLAY MODE ENTER "P 1" shows Program 1 is selected. To select Program 2, press (5) (n) repeatedly until "P 2" appears. 2 Press (2) (N) or (5) (n) to select the track you want to erase. Track slot number TRACK PLAY MODE ENTER The track currently registered in slot 6 of Program 1. 3 Press (6) (ENTER) for two seconds. When you erase a track from a slot number, the succeeding tracks shift up to fill the gap. DISC TRACK PLAY MODE ENTER µ TRACK PLAY MODE ENTER 4 To continue erasing tracks, repeat steps 2 and 3. 5 When you finish erasing tracks, press (4) (PLAY MODE) for two seconds. 6 Press (SHIFT). 12