Sony CDX-C780 Primary User Manual - Page 15
Locating a station
View all Sony CDX-C780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3 Enter the characters. 1 Rotate the dial clockwise to select the desired characters. (A n B n C n ··· Z n 0 n 1 n 2 n ··· 9 n + n - n * n / n \ n > n < n . n _ ) If you rotate the dial counterclockwise, the characters appear in the reverse order. If you want to put a blank space between characters, select "_" (underbar). 2 Press (5) (n) after locating the desired character. The flashing cursor moves to the next space. If you press (2) (N), the flashing cursor moves to the left. 3 Repeat steps 1 and 2 to enter the entire name. 4 To return to normal radio reception, press (LIST) for two seconds. Tip To erase/correct a name, enter "_" (under-bar) for each character. Displaying the station name Press (DSPL) during radio reception. Each time you press (DSPL), the item changes as follows: z Station name*1 z Frequency MOTION DISPLAY*2 Z ClockZ *1 If the station name is not stored, "NO Name" appears in the display for one second. *2 All the items above are scrolled in the display one by one in order. Erasing the station name 1 Tune in any station and press (LIST) for two seconds. 2 Press (DSPL) for two seconds. The station name appears in the display. 3 Rotate the dial to select the name you want to erase. 4 Press (6) (ENTER) for two seconds. The name is erased. Repeat steps 3 and 4 if you want to erase other names. 5 Press (LIST) for two seconds. The unit returns to normal radio reception mode. EN Locating a station by name - List-up 1 Press (LIST) momentarily. The name assigned to the current station appears in the display. ENTER 2 Press (LIST) repeatedly until you find the desired station. 3 Press (6) (ENTER) to tune in the desired station. Note After the station name or frequency has been displayed for five seconds, the display goes back to normal mode. To turn off the display, press (DSPL). Radio 15