Sony CDX-C780 Primary User Manual - Page 23

Erasing tracks in a program 1 Press (SHIFT), then press (4) (PLAY MODE) for two seconds. DISC TRACK PLAY MODE ENTER "P 1" shows Program 1 is selected. If you have labeled the disc, the bank edit mode appears. Press (4) (PLAY MODE) to display "P 1" above. To select Program 2, press (5) (n) repeatedly until "P 2" appears. 2 Press (2) (N) or (5) (n) to select the track you want to erase. Track slot number DISC TRACK PLAY MODE ENTER The track currently registered in slot 6 of Program 1. 3 Press (6) (ENTER) for two seconds. When you erase a track from a slot number, the succeeding tracks shift up to fill the gap. DISC TRACK PLAY MODE ENTER µ DISC TRACK PLAY MODE ENTER 4 To continue erasing tracks, repeat steps 2 and 3. 5 When you finish erasing tracks, press (4) (PLAY MODE) for two seconds. 6 Press (SHIFT). Labeling a CD - Disc Memo (CD unit with the custom file function) You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name (page 25) and select the specific tracks for playback (page 25). 1 Play the CD and press (LIST) for two seconds. DISC 2 Enter the characters. 1 Rotate the dial clockwise to select the desired characters. (A n B n C n ··· Z n 0 n 1 n 2 n ··· 9 n + n - n * n / n \ n > n < n . n _ ) EN DISC CD/MD Unit If you rotate the dial counterclockwise, the characters appear in the reverse order. If you want to put a blank space between characters, select "_" (underbar). 2 Press (5) (n) after locating the desired character. The flashing cursor moves to the next space. DISC If you press (2) (N), the flashing cursor moves to the left. 3 Repeat steps 1 and 2 to enter the entire name. 3 To return to normal CD playback mode, press (LIST) for two seconds. Tip To erase/correct a name enter "_" (under-bar) for each character. 23