Sony CDX-F5000 Operating Instructions (primary manual) - Page 19
Setting the equalizer (EQ3 - xplod
View all Sony CDX-F5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setting the equalizer (EQ3) You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM and OFF (equalizer OFF)). You can store a different equalizer setting for each source. Selecting the equalizer curve 1 Press (SOURCE) to select a source (Radio, CD or MD). 2 Press (EQ3) repeatedly to select the desired equalizer curve. Each time you press (EQ3), the item changes. Adjusting the equalizer curve You can store and adjust the equalizer settings for different tone ranges. 1 Press (SOURCE) to select a source (Radio, CD or MD). 2 Press (EQ3) repeatedly to select the desired equalizer curve. 3 Adjusting the equalizer curve. 1 Press the select button repeatedly to select the desired tone range. Each time you press the select button, the tone range changes. LOW t MID t HI (t BAL t FAD t LPF t SUB) 2 Rotate the volume control dial to adjust to the desired volume level. The volume level is adjustable by 1 dB steps from -10 dB to +10 dB. To cancel the equalizing effect, select "OFF." 3 Repeat step 1 and 2 to adjust the equalizer curve. To restore the factory-set equalizer curve, press the select button for 2 seconds. Note When EQ3 is set to "OFF," you cannot adjust the equalizer curve settings. 19