Sony CDX-FW700 Operating Instructions - Page 22
Setting the equalizer (EQ7 - xplod
View all Sony CDX-FW700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Setting the equalizer (EQ7) You can select an equalizer curve for 7 music types (Xplod, VOCAL, CLUB, JAZZ, NEWAGE, ROCK, CUSTOM), and OFF (equalizer off). You can store and adjust the equalizer settings for frequency and level. You can store the EQ7 setting for each source. Selecting the equalizer curve 1 Press (SOURCE) to select a desired source. 2 Press (EQ7) repeatedly to select a desired equalizer curve. Each time you press (EQ7), the item changes. Adjusting the equalizer curve 1 Press (MENU). 2 Press M or m repeatedly until "EQ7 Tune" appears, then press (ENTER). 3 Press < or , to select the desired equalizer curve, then press (ENTER). Each time you press < or ,, the item changes. 4 Select the desired frequency and level. 1 Press < or , to select the desired frequency. Each time you press < or ,, the frequency changes as follows: 62Hz y 157Hz y 396Hz y 1.0kHz y 2.5kHz y 6.3kHz y 16kHz To cancel the equalizing effect, select "OFF." After 3 seconds, the display returns to the normal play mode. 2 Press M or m to adjust the desired volume level. The volume level is adjustable by 1 dB steps from -10 dB to +10 dB. To restore the factory-set equalizer curve, press (ENTER) for 2 seconds. 5 Press (ENTER). After the effect setting is complete, the display returns to the normal play mode. 22