Sony CDX-GT500 Operating Instructions - Page 11
Rotary commander RM-X4S, Auxiliary audio equipment, Attaching the label, Location of controls - aux input
View all Sony CDX-GT500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Rotary commander RM-X4S Attaching the label Attach the indication label depending on how you mount the rotary commander. 1 While pushing the VOL control, press and hold (SEL). SEL MODE DSPL DSPL MODE SEL Location of controls The corresponding buttons on the rotary commander control the same functions as those on this unit. ATT SEL PRESET/ DISC MODE SOURCE OFF DSPL VOL SEEK/AMS OFF The following controls on the rotary commander require a different operation from the unit. • PRESET/DISC control The same as (GP/ALBM) +/- on the unit (push in and rotate). • VOL (volume) control The same as the volume control dial on the unit (rotate). • SEEK/AMS control The same as (SEEK) -/+ on the unit (rotate, or rotate and hold). Changing the operative direction The operative direction of the controls is factoryset as shown below. To increase Auxiliary audio equipment You can connect optional Sony portable devices to the BUS AUDIO IN/AUX IN terminal on the unit. If the changer or other device is not connected to the terminal, the unit allows you to listen to the portable device on your car speakers. Note When connecting a portable device, be sure BUS CONTROL IN is not connected. If a device is connected to BUS CONTROL IN, "AUX" cannot be selected by (SOURCE). Tip When connecting both a portable device and a changer, use the optional AUX-IN selector. Selecting auxiliary equipment 1 Press (SOURCE) repeatedly until "AUX" appears. Operate by the portable device itself. Adjusting the volume level Be sure to adjust the volume for each connected audio device before playback. 1 Turn down the volume on the unit. 2 Press (SOURCE) repeatedly until "AUX" appears. 3 Start playback of the portable audio device at a moderate volume. 4 Set your usual listening volume on the unit. 5 Press the select button repeatedly until "AUX Level" appears, and rotate the volume control dial to adjust the input level (±6 dB). To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. 11