Sony CDX-GT500 Operating Instructions - Page 4
Getting Started, Resetting the unit, Setting the clock, Detaching the front panel - us
View all Sony CDX-GT500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel and press the RESET button with a pointed object, such as a ball-point pen. RESET button Note Pressing the RESET button will erase the clock setting and some stored contents. Setting the clock The clock uses a 12-hour digital indication. 1 Press and hold the select button. The setup display appears. 2 Press the select button repeatedly until "Clock Adjust" appears. 3 Press (DSPL). The hour indication is selected. 4 Rotate the volume control dial to set the hour and minute. To move the digital indication, press (DSPL). 5 Press the select button. The setup is complete and the clock starts. With the card remote commander In step 4, to set the hour and minute, press M or m. Detaching the front panel You can detach the front panel of this unit to prevent theft. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. 1 Press (OFF). The unit is turned off. 2 Press (OPEN). The front panel is flipped down. 3 Slide the front panel to the right, then gently pull out the left end of the front panel. 1 2 Notes • Do not drop or put excessive pressure on the front panel and display window. • Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. 4