Sony CDX-H910UI Operating Instructions - Page 10

Card remote commander RM-X151, buttons, DSPL display button, ATT attenuate button, SEL select button

Page 10 highlights

Card remote commander RM-X151 wh M (+)/m (-) buttons To control CD/USB, the same as (1)/(2) (ALBUM -/+) on the unit. Setup, sound setting, etc., can be operated by M m. wj SCRL (scroll) button To scroll the display item. wk Number buttons To receive stored stations (press); store stations (press and hold). *1 When the SAT tuner is connected. *2 In the case of a CD changer, HD Radio tuner or SAT tuner being connected; when (SOURCE) is pressed, the connected device ("HD," "XM" or "SR") will appear in the display, depending on which device is connected. Furthermore, if (MODE) is pressed, you can switch the changer, HD Radio tuner band or SAT tuner band. Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first. The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 7). w buttons To control radio/CD/USB, the same as (SEEK) -/+ on the unit. Setup, sound setting, etc., can be operated by < ,. wa DSPL (display) button page 13, 14, 16 To change display items. ws VOL (volume) +/- button To adjust volume. wd ATT (attenuate) button To attenuate the sound. To cancel, press again. wf SEL (select) button The same as the SELECT/ENTER button on the unit. wg MODE button page 12, 16 Press to: Select the radio band (FM/AM)*2/ select the play mode of iPod. Press and hold to: Enter/cancel the passenger control. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

10
Card remote commander
RM-X151
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 7).
w;
<
(
.
)/
,
(
>
) buttons
To control radio/CD/USB, the same as
(SEEK)
–/+ on the unit.
Setup, sound setting, etc., can be operated by
<
,
.
wa
DSPL (display) button
page 13, 14, 16
To change display items.
ws
VOL (volume) +/– button
To adjust volume.
wd
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wf
SEL (select) button
The same as the SELECT/ENTER button on
the unit.
wg
MODE button
page 12, 16
Press to: Select the radio band (FM/AM)*
2
/
select the play mode of iPod.
Press and hold to: Enter/cancel the passenger
control.
wh
M
(+)/
m
(–) buttons
To control CD/USB, the same as
(1)
/
(2)
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M
m
.
wj
SCRL (scroll) button
To scroll the display item.
wk
Number buttons
To receive stored stations (press); store
stations (press and hold).
*1
When the SAT tuner is connected.
*2
In the case of a CD changer, HD Radio tuner or
SAT tuner being connected; when
(SOURCE)
is
pressed, the connected device (“HD,” “XM” or “SR”)
will appear in the display, depending on which
device is connected. Furthermore, if
(MODE)
is
pressed, you can switch the changer, HD Radio
tuner band or SAT tuner band.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.