Sony CDX-H910UI Operating Instructions - Page 12
Radio, Storing and receiving stations, Storing automatically - BTM, Storing manually - replacement
UPC - 027242746596
View all Sony CDX-H910UI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Radio Storing and receiving stations Caution When tuning in stations while boating, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically - BTM 1 Press (SOURCE) repeatedly until "TUNER" appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. 2 Press and hold (BTM) until "BTM" flashes. The unit stores stations in order of frequency on the number buttons. A beep sounds when the setting is stored. Storing manually 1 While receiving the station that you want to store, press and hold a number button ((1) to (6)) until "MEM" appears. The number button indication appears in the display. Note If you try to store another station on the same number button, the previously stored station will be replaced. Receiving the stored stations 1 Select the band, then press a number button ((1) to (6)). Tuning automatically 1 Select the band, then press (SEEK) -/+ to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) -/+ to locate the approximate frequency, then press (SEEK) -/+ repeatedly to fine adjust to the desired frequency (manual tuning). CD For details on selecting a CD changer, see page 19. Playing a disc 1 Slide the OPEN switch in the direction of the arrow. 2 Open the front panel. 3 Insert the disc (label side up). 4 Close the front panel. Playback starts automatically. Notes • Do not put anything on the inner surface of the front panel. • Be sure to close the front panel during operation. Ejecting the disc 1 Slide the OPEN switch and open the front panel. 2 Press Z. The disc is ejected. 3 Close the front panel. 12