Sony CDX-M30 Operating Instructions - Page 16
Customizing the equalizer curve - EQ3, Adjusting setup items - SET - demo mode
UPC - 027242718739
View all Sony CDX-M30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Customizing the equalizer curve - EQ3 "CUSTOM" of EQ3 allows you to make your own equalizer settings. 1 Select a source, then press the select button repeatedly to select "EQ3." 2 Rotate the volume control dial to select "CUSTOM." 3 Press the select button repeatedly until "LOW," "MID" or "HI" appears. 4 Rotate the volume control dial to adjust the selected item. The volume level is adjustable in 1 dB steps, from -10 dB to +10 dB. Repeat steps 3 and 4 to adjust the equalizer curve. To restore the factory-set equalizer curve, press and hold the select button before the setting is complete. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Tip Other equalizer types are also adjustable. 16 Adjusting setup items - SET 1 Press and hold the select button. The setup display appears. 2 Press the select button repeatedly until the desired item appears. 3 Rotate the volume control dial to select the setting (example "ON" or "OFF"). 4 Press and hold the select button. The setup is complete and the display returns to normal play/reception mode. Note Displayed items will differ, depending on the source and setting. The following items can be set (follow the page reference for details): "z" indicates the default settings. CLOCK-ADJ (Clock Adjust) (page 6) CT*1 (Clock Time) To set "CT-ON" or "CT-OFF" (z) (page 12, 13). BEEP To set "BEEP-ON" (z) or "BEEP-OFF." AUX-A*2 (AUX Audio) To turn the AUX source display "AUX-A-ON" (z) or "AUX-A-OFF" (page 17). A.OFF (Auto Off) To shut off automatically after a desired time when the unit is turned off, - "A.OFF-NO" (z), "A.OFF-30S (Seconds)," "A.OFF-30M (Minutes)" or "A.OFF-60M (Minutes)." REAR/SUB*2 To switch the audio output. - "REAR-OUT" (z): to output to a power amplifier. - "SUB-OUT": to output to a subwoofer. DEMO (Demonstration) To set "DEMO-ON" (z) or "DEMO-OFF." DIMMER To change the brightness of the display. - "DIMMER-AT" (z): to dim the display automatically when you turn lights on. - "DIMMER-OFF": to deactivate the dimmer. - "DIMMER-ON": to dim the display. CONTRAST To adjust the contrast of the display. The contrast level is adjustable in 7 steps. ILLUMI (Illumination) To change the illumination color: "ILLUMI-1" (z) or "ILLUMI-2."