Sony CDX-MP40 Operating Instructions - Page 19

When an MP3 file is played, you can select an album using the rotary commander. (With this unit) To Do this Skip albums Push in and rotate [once for - Album selection each album] the control. To continuously skip albums, push in and rotate (and hold) the control. (With optional unit) To Do this Skip discs - Disc selection Push in and rotate [once for each disc] the control. To continuously skip discs, push in and rotate once and rotate again within 2 seconds (and hold) the control. Skip albums 1 To enter Album selection - Album selection mode, push in, then rotate and hold the control. Within 2 seconds, proceed to step 2. 2 Push in, then rotate quickly and repeatedly, to skip albums one by one. Changing the operative direction The operative direction of controls is factory-set as shown below. To increase Adjusting the balance and fader You can adjust the balance and fader. 1 Press (SEL) repeatedly until "BAL" or "FAD" appears. Each time you press (SEL), the item changes as follows: LOW* t MID* t HI* t BAL (left-right) t FAD (front-rear) * When EQ3 is activated (page 20). 2 Press the volume +/- button to adjust the selected item. Note Adjust within 3 seconds after selecting the item. Quickly attenuating the sound Press (ATT). After "ATT-ON" momentarily appears, the "ATT" appears in the display. To restore the previous volume level, press (ATT) again. Tip When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Press (SEL) for 2 seconds while pushing the VOL control. 19