Sony CMT-CP1 Operating Instructions - Page 18

Playing a tape (continued) To Stop playback Do this Press TAPE x (or x on the remote). Pause Press TAPE X (or X on the remote). Press again to resume playback. Fast-forward or rewind With the tape stopped, press TAPE M (or J on the remote) or TAPE m (or j on the remote). Remove or replace Press TAPE EJECT A. the tape Adjust the volume Turn VOLUME (or press VOL +/- on the remote). The CD Player Checking the remaining playing time on the CD Do the procedure below to check the remaining playing time of the current track or the entire CD. DISPLAY Tips • If you press TAPE nN (or TAPE hH on the remote) when the power is off, the system automatically turns on and starts playing the tape if there is a tape in the holder (One Touch Play). • To switch to the tape while listening to another source, press TAPE nN (or TAPE hH on the remote) while the tape is stopped. The tape will automatically start playing (Automatic Source Selection). • To play a tape recorded with the Dolby NR system, press DOLBY NR on the remote before step 4. ";" appears. , Press DISPLAY. Each time you press this button, the display changes as follows: During playback t Current track number and elapsed playing time of the track r Current track number and remaining playing time of the track r Remaining playing time of the entire CD r Clock display Tip Each time you press DISPLAY while the CD (or tape) is stopped, the display changes as follows: t Total playing time r Clock display r Current source display Note If the CD contains 25 tracks or more, the remaining playing time of the current track will appear as for each track starting with the 25th. 18