Sony CMT-ED2U Operating Instructions - Page 34
Specifications
View all Sony CMT-ED2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Specifications Amplifier section For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8-ohm loads both channels driven, from 90 - 15,000 Hz; rated 15 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from 250 milliwatts to rated output. North American model: Continuous RMS power output (reference): 17 + 17 W (8 ohms at 1 kHz, 10% THD) European model: DIN power output (rated): 15 + 15 W (8 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 17 + 17 W (8 ohms at 1 kHz, 10% THD) Music power output (reference): 35 + 35 W Other models: The following measured at 230 V AC, 60 Hz DIN power output (rated): 15 + 15 W (8 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 17 + 17 W (8 ohms at 1 kHz, 10% THD) Inputs MD IN (phono jacks): Sensitivity 1,000 mV, impedance 47 kilohms Outputs MD OUT (phono jacks): Sensitivity 500 mV, impedance 1 kilohm CD DIGITAL OUT OPTICAL: Optical PHONES (stereo phone jack): Accepts headphones with an impedance of 8 ohms or more SPEAKER: Accepts impedance of 8 to 16 ohms CD player section System Laser Laser output Wavelength Frequency response Compact disc and digital audio system Semiconductor laser (λ = 780 nm) Emission duration: continuous MAX 44.6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. 780 - 790 nm 2 Hz - 20 kHz (±0.5 dB) Tape player section Recording system 4-track 2-channel stereo Frequency response (DOLBY NR OFF) 50 - 13,000 Hz (±3 dB), using a Sony TYPE I cassette 50 - 14,000 Hz (±3 dB), using a Sony TYPE II cassette Wow and flutter ±0.15% W. Peak (IEC) 0.1% W. RMS (NAB) ±0.2% W. Peak (DIN) Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range North American model: Other models: Antenna Antenna terminals Intermediate frequency 87.5 - 108.0 MHz (100-kHz step) 87.5 - 108.0 MHz (50-kHz step) FM wire antenna 75 ohms unbalanced 10.7 MHz AM tuner section Tuning range North American model: European model: Other models: Antenna Intermediate frequency 530 - 1,710 kHz (with the tuning interval set at 10 kHz) 531 - 1,710 kHz (with the tuning interval set at 9 kHz) 531 - 1,602 kHz (with the tuning interval set at 9 kHz) 530 - 1,710 kHz (with the tuning interval set at 10 kHz) 531 - 1,602 kHz (with the tuning interval set at 9 kHz) AM bar antenna, external antenna terminal 450 kHz 34