Sony CMT-ED2U Operating Instructions - Page 7
Step 2: Setting the time
View all Sony CMT-ED2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started 3 Reinstall the rear cover (see step 4 on the page 5). You can hang the AM antenna on a wall as shown below. Hook If noise is heard while listening to an FM station, remove the FM antenna from the rear panel and place the antenna outside. Inserting two size-AA (R6) batteries into the remote Step 2: Setting the time Before you can use the system's timer functions, set the internal clock. The clock uses a 24-hour system on the European model, and a 12-hour system on other models. The 24-hour system is used here for illustration purposes. To turn on the system, press ?/1. ?/1 (Power) 3,5,7 e EE e Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Notes on batteries • Make sure the battery poles (plus/minus) are properly oriented. • Do not use a new battery with an old one. • Do not use different types of batteries together. • If you do not use the remote for a long period of time, remove the batteries to prevent possible damage from battery leakage and corrosion. • Do not use a battery that is leaking. • If a battery has leaked, clean the battery compartment and replace all the batteries. • Do not place the remote in an extremely hot or humid place. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. 1 2,4, 6,8 1 Press TIMER SET. The clock on the display begins to flash. When "DAILY" or "c REC" appears, press l/L repeatedly until it disappears. SU 000 continued 7