Sony CMT-ED2U Operating Instructions - Page 5
VOLTAGE SELECTOR, Getting Started
View all Sony CMT-ED2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Getting Started 2 Fasten the four screws to both sides of the unit. + - 4 After making sure that the cords are correctly and securely connected, reinstall the rear cover. Pass the speaker cords through the holes on both sides of the rear cover. 3 Attach the speakers. Facing the front of the unit, attach the speaker connected to the SPEAKER R terminals onto the right side of the unit and the speaker connected to the SPEAKER L terminals onto the left side of the unit. Afterwards, push down on the speakers to make sure they are securely fastened to the unit. + - U 5 Turn the unit upside down while holding the glass door firmly with your hand, then set the speaker cord into the groove at the bottom of the unit. VOLTAGE SELECTOR 3 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. 220-240V 110-120V * * This groove is used to hold the power cord when the optional stand is attached. continued 5