Sony CMT-EP50 Operating Instructions - Page 10
Tuner, Presetting radio stations
View all Sony CMT-EP50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Tuner Presetting radio stations You can preset up to 30 stations. 1 Press TUNER (TUNER/BAND on the remote) repeatedly to select FM or AM. 2 Press and hold TUNING (TUNING/ CLOCK/TIMER on the remote) + or - until the frequency indication starts to change, then release it. Scanning stops automatically when the system tunes in a station. "STEREO" (for a stereo program) appears. If it doesn't stop automatically, press TUNING (TUNING/CLOCK/TIMER on the remote) + or - repeatedly to tune in a station manually. 3 Press TUNER MEM (TUNER MEM/ ENTER on the remote). A preset number appears in the display. The stations are stored from preset number 1. To tune in a station with a weak signal Press TUNING (TUNING/CLOCK/TIMER on the remote) + or - repeatedly in step 2 to tune in the station manually. To set another station to an existing preset number Start over from step 1. After step 3, press PRESET + or - repeatedly to select the preset number where you want to store the other station and the press ENTER (TUNER MEM/ ENTER on the remote). You can preset a new station in the selected preset number. To erase all preset stations 1 Press and hold TUNER MEM (TUNER MEM/ENTER on the remote) until "ERASE" and "PRESET" appear alternately. 2 Press ENTER (TUNER MEM/ENTER on the remote). All preset stations are cleared. To change the AM tuning interval (except for the European model) Disconnect the power cord from the wall outlet first, and then set the AM FREQ STEP switch at the rear to 9 kHz or 10 kHz. Tip The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. Preset number 4 Press ENTER (TUNER MEM/ENTER on the remote). The station is stored. 5 Repeat steps 1 to 4 to store other stations. 10