Sony CMT-MX700Ni Operating Instructions - Page 20
Making basic settings, Turning on the system, Setting the clock - receiver
UPC - 027242786172
View all Sony CMT-MX700Ni manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Making basic settings When the system is turned on for the first time after purchase, some basic settings are required. • Network Standby - "Off" (factory setting) This standby mode consumes less power than when network standby is set to "On," though the system takes more time to resume operations when powered on again. • Network Standby - "On" In this standby mode, the system is connected to the network and remains partially active to quickly resume operations when controlled over the network, or powered on again. To set the network standby mode, see "Setting the network standby mode" (page 51). Receiving a DAB/DAB+ radio station (CMT-MX750Ni only) When you turn on the system for the first time after you purchase the system, DAB Initial Scan starts automatically, and a list of available services is stored. Do not press any button on the unit or the remote during the DAB Initial Scan. If you do so, scanning will be interrupted and the service list may not be properly created. To start the DAB Initial Scan manually, perform the procedure of "Performing a DAB Initial Scan manually" (page 32). Turning on the system Press =/1 (power). The system turns on, and the STANDBY indicator turns to green. To turn off the system Press =/1 (power). The system is turned off, and the STANDBY indicator lights up in red. When the network standby is set to "On," the STANDBY indicator lights up in amber, and the clock appears in the display. Setting the clock The time on the clock must be set correctly for the timer function. 1 Press =/1 (power) to turn on the system. 20GB