Sony CMT-MX700Ni Operating Instructions - Page 47
Listening to audio material from an external component
UPC - 027242786172
View all Sony CMT-MX700Ni manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Listening to audio material from an external component Operations You can listen to the playback audio from an external component (such as a portable music player, etc.) connected to the AUDIO IN jack on the unit. Use an audio connecting cable (not supplied) to connect the AUDIO IN jack on the unit and the audio output jack on the external component. Make sure the audio connecting cable (not supplied) is firmly inserted into both jacks. If not, noise may be generated in the audio output. Notes • Lower the volume on this system using VOLUME - before disconnecting the external component. • The system may enter standby mode automatically if the volume level of the connected component is too low. Adjust the component's volume accordingly. See "Turning off the automatic standby function" (page 21). 1 Press VOLUME - to turn down the volume on this system. 2 Connect an external component and the unit using an audio connecting cable (not supplied). AUDIO IN jack 3 Press AUDIO IN to select the AUDIO IN function. 4 Start playback of the connected component, and adjust its volume. Playback audio is output from the speakers of this system. For details on the operation of the connected component, refer to the operating manual supplied with the connected component. 47GB