Sony CMT-U1BT Operating Instructions - Page 16

Playing music of a BLUETOOTH device You can operate a BLUETOOTH device by connecting the system and a BLUETOOTH device using AVRCP. If the system is not connected with a BLUETOOTH device using AVRCP, "Not in Use" appears when you operate the system. 1 Select the BLUETOOTH function. Press BLUETOOTH   on the unit. 2 Establish the connection from the BLUETOOTH device. For details about the operations of the BLUETOOTH device, refer to the operation manual supplied with your BLUETOOTH device. Once the connection is established, the system display changes as follows: "Connect"  Name of the BLUETOOTH device 3 Start playback. Press  (or BLUETOOTH  on the unit) . Depending on the BLUETOOTH device, you may need to start up the AV software of the BLUETOOTH device beforehand. 4 Adjust the volume. Press VOLUME +/- . To check the address of a connected BLUETOOTH device Press DISPLAY  while the BLUETOOTH device name appears in the system display. The BLUETOOTH device address appears for 8 seconds. To cancel the connection with a BLUETOOTH device Change the system's function or turn off the system. When using the system next time, reestablish the connection with the BLUETOOTH device. Other operation To Press Pause playback Stop playback Select a file Find a point in Hold down a file Note These operations may not be available for certain BLUETOOTH devices. In addition, the actual operations may differ according to the connected BLUETOOTH device. Note on connections with BLUETOOTH devices If you cannot connect with a paired BLUETOOTH device, perform the pairing operation between the system and the BLUETOOTH device again. 16GB