Sony CSS-PHA Operating Instructions - Page 23
Symptom, Cause/Solution, The Remote Commander
View all Sony CSS-PHA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Symptom Your computer does not recognize your camera The camera does not work, and no operations can be performed The Remote Commander does not work The connection between the printer and the Cyber-shot Station cannot be established Cause/Solution • The camera is turned off. t Turn on the camera. • You are not using the supplied USB cable. t Use the supplied USB cable. • The USB cable is not connected firmly. t Disconnect the USB cable from both the computer and the Cyber-shot Station, and connect it again firmly. Make sure that "USB Mode" is displayed on the LCD screen. • The camera is not placed on the Cyber-shot Station correctly. t Place the camera correctly. • The USB connectors on your computer are connected to other equipment besides the keyboard, the mouse, and the Cyber-shot Station. t Disconnect all equipment other than the keyboard, the mouse, and the Cybershot Station from the USB connectors. • The camera is not placed on the Cyber-shot Station correctly. t Place the camera correctly. • The AC adaptor is disconnected. t Properly connect the AC adaptor. • The battery in the Remote Commander is dead. t Replace it with a new one. • The printer is not PictBridge-compliant. t Consult with the printer manufacturer. • The printer is not set for the connection with the camera. t Check that the printer is turned on and can connect with the camera. • [USB Connect] is not set to [PictBridge] in the SET UP settings. t Set it to [PictBridge]. 23-GB