Sony CSS-PHA Operating Instructions - Page 24
The CHARGE lamps light, on the Cyber-shot Station
View all Sony CSS-PHA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Symptom You cannot print images Cause/Solution • The camera is not connect to the printer. t Check that the camera and the printer are properly connected using the USB cable. • The printer is not turned on. t Turn on the printer. For further infomation, refer to the operating instructions supplied with the printer. • Movies cannot be printed. • Images modified with a computer or images shot using other than this camera may not be able to be printed. Printing is canceled • You disconnected the USB cable before the mark disappears. • You removed the camera from the Cyber-shot Station before the mark disappears. You cannot insert the date or print images in the index mode is printed on the date-inserted part • The printer does not provide these functions. t Consult with the printer manufacturer whether the printer provides these functions or not. • The date may not be inserted in the index mode, depending on the printer. t Consult with the printer manufacturer. • The recording date data is not recorded on the image. t The images that do not have the recording date data cannot be printed with the date inserted. Set [Date] to [Off] and print the image. The CHARGE lamps light up when no camera is placed on the Cyber-shot Station • You have pressed the Control button (in the order of v/b/V/B and ) when the camera was placed on the Cyber-shot Station, and now the Cyber-shot Station is in the demonstration mode. t To cancel the demonstration mode, discconect the AC adaptor once and connect it again. Alternatively, place the camera on the Cyber-shot Station again. 24-GB