Sony DCR-HC48 Operating Guide - Page 15
Step 3: Turning the power on and setting the date and time - handycam station
UPC - 027242701823
View all Sony DCR-HC48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Battery pack NP-FH70 NP-FH100 LCD panel opened* 300 695 LCD panel closed 370 845 * When the LCD backlight turns on. On the battery pack • Before changing the battery pack, slide the POWER switch to OFF (CHG). • The CHG (charge) lamp flashes during charging, or the Battery Info (p. 14) will not be correctly displayed under the following conditions. - The battery pack is not attached correctly. - The battery pack is damaged. - The battery pack is worn-out (for Battery Info only). • The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder or the Handycam Station, even when the power cord is disconnected from the wall outlet. On the charging/recording/playback time • Times measured with the camcorder at 25°C (77°F). (10°C - 30°C (50°F - 86°F) is recommended.) • The recording and playback time will be shorter when you use your camcorder in low temperatures. • The recording and playback time will be shorter depending on the conditions under which you use your camcorder. On the AC Adaptor • Use the nearby wall outlet when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet immediately if any malfunction occurs while using your camcorder. • Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. • Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. • Even if your camcorder is turned off, AC power (house current) is still supplied to it while connected to the wall outlet via the AC Adaptor. Step 3: Turning the power on and setting the date and time Set the date and time when using this camcorder for the first time. If you do not set the date and time, the [CLOCK SET] screen appears every time you turn on your camcorder or change the POWER switch position. Touch the button on the LCD screen. POWER switch 1 While pressing the green button, slide the POWER switch in the direction of the arrow to turn on the respective lamp. CAMERA-TAPE: To record on a tape. CAMERA-MEMORY: To record on a "Memory Stick Duo." PLAY/EDIT: To play or edit pictures. The [CLOCK SET] screen appears. CLOCK SET -:--:-- DATE 2007Y JAN M 1D 12: 00 AM OK 2 Set [Y] (year) with touch . / , then You can set any year up to the year 2079. Continued , 15 Getting Started