Sony DCR-HC48 Operating Guide - Page 85

About care and storage of the lens, To remove dust from inside the, viewfinder, On charging the pre-

Get Sony DCR-HC48 - 1MP MiniDV Handycam Camcorder PDF manuals and user guides
UPC - 027242701823
View all Sony DCR-HC48 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

About care and storage of the lens • Wipe the surface of the lens clean with a soft cloth in the following instances: - When there are fingerprints on the lens surface. - In hot or humid locations - When the lens is exposed to salty air such as at the seaside. • Store in a well-ventilated location subject to little dirt or dust. • To prevent mold, periodically clean the lens as described above. It is recommended that you operate your camcorder about once a month to keep it in optimum state for a long time. To remove dust from inside the viewfinder 1 Pull out the viewfinder. 2 While pushing in the tab on the side with a fine-tipped implement such as a ball point pen, pull the eyecup block in the direction of the arrow to remove. Tab 5 Remove dust from the inside area where the eyecup block was attached with a camera blower, etc. 6 Attach the eyecup block to the viewfinder, pushing it straight on until it clicks. Additional Information 3 Remove dust from the eyecup block with a camera blower, etc. 4 Press the viewfinder onto the body of the camcorder. b Notes • The eyecup block is a precision part. Do not disassemble it further. • Do not touch the lens of the eyecup block. On charging the pre-installed rechargeable battery Your camcorder has a pre-installed rechargeable battery to retain the date, time, and other settings even when the POWER switch is set to OFF (CHG). The preinstalled rechargeable battery is always charged while your camcorder is connected to the wall outlet via the AC Adaptor or while the battery pack is attached. The rechargeable battery will be fully discharged in about 3 months if you do not use your camcorder at all without the Continued , 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
85
Additional Information
About care and storage of the lens
•
Wipe the surface of the lens clean with a soft
cloth in the following instances:
–
When there are fingerprints on the lens
surface.
–
In hot or humid locations
–
When the lens is exposed to salty air such as
at the seaside.
•
Store in a well-ventilated location subject to
little dirt or dust.
•
To prevent mold, periodically clean the lens as
described above. It is recommended that you
operate your camcorder about once a month to
keep it in optimum state for a long time.
To remove dust from inside the
viewfinder
1
Pull out the viewfinder.
2
While pushing in the tab on the side
with a fine-tipped implement such as a
ball point pen, pull the eyecup block in
the direction of the arrow to remove.
3
Remove dust from the eyecup block
with a camera blower, etc.
4
Press the viewfinder onto the body of
the camcorder.
5
Remove dust from the inside area where
the eyecup block was attached with a
camera blower, etc.
6
Attach the eyecup block to the
viewfinder, pushing it straight on until it
clicks.
b
Notes
•
The eyecup block is a precision part. Do not
disassemble it further.
•
Do not touch the lens of the eyecup block.
On charging the pre-installed
rechargeable battery
Your camcorder has a pre-installed
rechargeable battery to retain the date, time,
and other settings even when the POWER
switch is set to OFF (CHG). The pre-
installed rechargeable battery is always
charged while your camcorder is connected
to the wall outlet via the AC Adaptor or
while the battery pack is attached. The
rechargeable battery will be fully
discharged in about
3 months
if you do
not use your camcorder at all without the
Tab
Continued
,