Sony DCR-IP210 Operating Instructions - Page 191

Types of trouble and how to correct trouble Symptom Cause and/or Corrective Actions While charging the battery pack inserted in your camcorder, the battery CHG lamp does not light up. • Charging is completed. • The battery pack is not properly inserted. c Insert it properly (p. 17). You cannot charge the battery pack inserted in your camcorder. • The POWER switch is not set to (CHG) OFF. c Set it to (CHG) OFF. While charging the battery pack inserted in your camcorder, the battery CHG lamp flashes. • The battery pack is not properly inserted. c Insert it properly (p. 17). • Something is wrong with the battery pack. c Please contact your Sony dealer or local authorized Sony service facility. When you set the POWER switch to VCR or (CHG) OFF, if you move your camcorder, you may hear a clattering sound from inside your camcorder. • This is because some functions use a linear mechanism. This is not a malfunction. The buttons do not appear on the touch panel. • DISPLAY/TOUCH PANEL is pressed. c Press the LCD screen lightly. c Press DISPLAY/TOUCH PANEL on your camcorder or DISPLAY on the Remote Commander (p. 43). The buttons on the LCD screen do not work. c Adjust the LCD screen (CALIBRATION) (p. 204). The indicators appear mirrorreversed in the viewfinder. • The mirror mode is activated. This is not a malfunction (p. 35). The characters on the TV screen are reversed. • It occurs if you set DISPLAY to V-OUT/LCD in the menu settings when using mirror mode. This is not a malfunction. Image data cannot be transferred to your computer by the USB connection. • The USB cable was connected before installation of the USB driver was completed. c Uninstall the incorrect USB driver and reinstall the USB driver (p. 161). • USB STREAM is set to OFF in the menu settings. c Set it to ON (p. 184). A cassette cannot be removed even if • Moisture condensation has started to condense in your the cassette lid is open. camcorder (p. 201). Troubleshooting 191