Sony DCR-PC350 Camera Operations Guide - Page 21
Step 5: Setting the date and time
View all Sony DCR-PC350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Getting started the viewfinder. Have the LCD panel rotated 180 degrees and closed with the screen facing out. 1 Set the power mode to CAMERA-TAPE or CAMERA-MEMORY (p. 19). 2 Close the LCD panel with the screen facing out. appears on the screen. 3 Touch . [Set LCD off?] appears on the screen. 4 Touch [YES]. The LCD screen is turned off. 5 Touch the LCD screen while checking the display in the viewfinder. [EXPOSURE], etc. are displayed. 6 Touch the button you want to set. • [EXPOSURE]: Adjust with / and touch . • [FADER]: Touch it repeatedly to select a desired effect (only in the CAMERA- TAPE mode). • : The LCD screen lights up. To hide the buttons on the LCD screen, touch . z Tip • To adjust the brightness of the viewfinder backlight, select (STANDARD SET) menu, [LCD/VF SET], then [VF B.LIGHT] (when you are using the battery pack, p. 85). Step 5: Setting the date and time Set the date and time when using this camcorder for the first time. If you do not set the date and time, the [CLOCK SET] screen appears every time you turn on your camcorder. b Note • If you do not use your camcorder for about 3 months, the built-in rechargeable button-type battery gets discharged and the date and time settings may be cleared from the memory. In that case, charge the rechargeable button-type battery (p. 135) and then set the date and time again. POWER switch 1 Turn on your camcorder (p. 19). 2 Open the LCD panel. Proceed to step 7 when you set the clock for the first time. 3 Touch . 60min MENU 1/3 FADER SPOT METER -:--:-- EXPO- SURE SPOT FOCUS PRGRAM AE ,continued Getting started 21