Sony DCR-TRV525 Operating Instructions - Page 67

Changing the menu settings Icon/item LCD B. L. LCD COLOR Mode Meaning z BRT NORMAL To set the brightness on the LCD screen normal BRIGHT To brighten the LCD screen - To adjust the color on the LCD screen, turning the SEL/PUSH EXEC dial to adjust the following bar POWER switch VTR CAMERA MEMORY VTR CAMERA MEMORY Customizing Your Camcorder VF B.L* to lighten to darken z BRT NORMAL To set the brightness in the viewfinder normal BRIGHT To brighten viewfinder CONTINUOUS QUALITY FLD./FRAME PRINT MARK PROTECT SLIDE SHOW DELETE ALL z OFF MULTI SCRN z FINE STANDARD z FIELD FRAME z OFF ON z OFF ON Not to record continuously To record 9 images continuously (p. 78) To record still images in the fine image quality mode, using the "Memory Stick" To record still images in the standard image quality mode, using the "Memory Stick" To record moving subjects To record stopping subjects in high quality To cancel print marks on still images To write a print mark on the recorded still images you want to print out later Not to protect still images To protect selected still images against accidental erasure (p. 97) To play back images in a continuous loop (p. 95) To delete all the images (p. 99) FORMAT z RETURN FORMAT PHOTO SAVE To cancel formatting. To format an inserted "Memory Stick." 1. Select FORMAT with the SEL/PUSH EXEC dial, then press the dial. 2. Turn the SEL/PUSH EXEC dial to select FORMAT, then press the dial. 3. After EXECUTE appears, press the SEL/ PUSH EXEC dial. FORMATTING appears during formatting. COMPLETE appears when formatting is finished. To duplicate still images (p. 87) VTR CAMERA MEMORY MEMORY VTR MEMORY MEMORY VTR MEMORY VTR MEMORY MEMORY VTR MEMORY VTR MEMORY VTR * DCR-TRV525 only Notes on LCD B.L. and VF B.L. • When you select BRIGHT, battery life is reduced by about 10 percent during recording. • When you use power sources other than the battery pack, BRIGHT is automatically selected. Notes on formatting • Supplied or optional "Memory Stick"s have been formatted at factory. Formatting with this camcorder is not required. • Do not turn the POWER switch or press any button while the display shows FORMATTING. • You cannot format the "Memory Stick" if the write-protect tab on the "Memory Stick" is set to LOCK. • Format again if the message appears. Formatting erases all information on the "Memory Stick" Check the contents of the "Memory Stick" before formatting. • Formatting erases sample images on the "Memory Stick." • Formatting erases the protected image data on the "Memory Stick." 67