Sony DCR-TRV720 Operating Instructions - Page 59
Using the i.LINK cable DV connecting cable, When you have finished dubbing a tape, DV IN/OUT jack
View all Sony DCR-TRV720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Dubbing a tape Using the i.LINK cable (DV connecting cable) Simply connect the i.LINK cable (DV connecting cable) (not supplied) to DV IN/OUT and to DV IN/OUT of the DV products. With digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing. You cannot dub the screen indicators. (1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. (2) Set the input selector on the VCR to DV IN if it is available. Refer to the operating instructions of your VCR for more information. (3) Set the POWER switch to VTR. (4) Play back the recorded tape on your camcorder. (5) Start recording on the VCR. Refer to the operating instructions of your VCR for more information. Editing DV IN/OUT (not supplied) DV S VIDEO LANC DV IN/OUT : Signal flow When you have finished dubbing a tape Press x on both your camcorder and the VCR. Note on tapes that are not recorded in the Digital8 system The picture may fluctuate. This is not a malfunction. During playback of tapes recorded in the Hi8/standard 8 system Digital signals are output as the image signals from the DV IN/OUT jack. You can connect one VCR only using the i.LINK cable (DV connecting cable). See page 123 for more information about i.LINK. During digital editing You cannot use PICTURE EFFECT or DIGITAL EFFECT button function. If you record playback pause picture via the DV IN/OUT jack The recorded picture becomes rough. Also, when you play back the recorded pictures on other video equipment, the picture may jitter. 59