Sony DG910 Instructions Manual - Page 55
Settings for the video (VIDEO menu), VIDEO menu - amp
UPC - 027242707023
View all Sony DG910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Amplifier Operations Settings for the video (VIDEO menu) You can use the VIDEO menu to make various adjustments for HDMI settings, assign the composite video input to DMPORT input, etc. Select "6-VIDEO" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 45) and "Overview of the menus" (page 46). VIDEO menu parameters x OSD (On-Screen Display on/off) Lets you view the amplifier menus on the TV screen and you can adjust the settings easily. • OSD ON The on-screen display is turned on so that the amplifier menus are displayed on the TV screen. • OSD OFF The on-screen display is turned off. Note The on-screen display is not output from the COMPONENT VIDEO MONITOR OUT jack of the receiver. Be sure to connect the HDMI OUT or MONITOR VIDEO OUT jack to your TV. x DMPORT V. (DIGITAL MEDIA PORT video assign) Lets you assign the composite video input to DMPORT input so that you can view the images on the TV screen. For details, see "Watching a connected component through DMPORT connection" (page 82). x AUDIO (HDMI AUDIO)* Lets you set the HDMI audio output from the playback component connected to the receiver via a HDMI connection. • AMP The HDMI audio signals from the playback component is only output to the speakers connected to the receiver. Multi channel sound can be played back as it is. Note Sound is not output from the TV's speakers. • TV+AMP The sound is output from TV's speaker and the speakers connected to the receiver. Notes • The sound quality of the playback component depends on the TV's sound quality, such as the number of channels, and the sampling frequency, etc. When the TV has stereo speakers, the sound output from the receiver is also stereo as that of the TV, even if you play back multi channel software. • When you connect the receiver to an image display component (projector, etc.), sound may not be output from the receiver. In this case, select "AMP ". x CONTROL (HDMI CONTROL)* Lets you turn the HDMI CONTROL function on or off. For details, refer to the "HDMI CONTROL Guide" supplied with the receiver. x NAME IN (Naming inputs) Lets you set the name of inputs. For details, see "Naming inputs" (page 83). * When you select this parameter, the "HDMI" flashes on the display. 55US