Sony DPP-FP75 Operating Instructions - Page 57
Troubleshooting, the Sony DPP
UPC - 027242734739
View all Sony DPP-FP75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Symptom The printer does not respond to the printing order from the PC. Check - An image is printed with borders even if I select "Borderless". • Are you using an software application other than Picture Motion Browser? The print quantity specified in "Pages Per Sheet" on the "Layout" tab of the "Sony DPP- FP65/FP75 - Properties" dialog box does not match the actual print quantity and printed results. Colors of the printed image from a PC are different from - those printed from a memory card. Cause/Solutions c If there is no trouble displayed on the Windows desktop, check the printer's LCD screen. If the printer shows trouble, do the following: 1. Turn off the 1 (on/standby) button of the printer. 2. Disconnect the power cable, wait for 5 to 10 seconds, and then connect the cable again. 3. Restart your computer. If these do not solve the problem, consult your Sony dealer or service facilities. c When using an application other than the Picture Motion Browser, an image might be printed with Borders even if you select Borderless Print. If you can set Borders/Borderless with an application, set an image to be printed fully in the print range even if it is printed over the range. c Depending on the application you are using. the print quantity setting of the application may have priority over the setting specified in the printer driver dialog box. c Since the process used in printing an image from a memory card differs from that used in printing from a PC, the colors may not be exactly identical. Troubleshooting 57 GB