Sony DRBT140Q Operating Instructions - Page 10

Pairing What is pairing? Procedures of pairing Bluetooth devices need to be "paired" with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, except in the following cases: • Pairing information is deleted after repair, etc. • This unit is paired with 9 or more devices. This unit can be paired with up to 8 devices; if a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one. • When recognition of the unit by the device to be connected is deleted. • This unit is initialized (page 25). All pairing information is deleted. 1 Place the Bluetooth device within 1 m (3 ft) of this unit. 2 Press and hold the PAIRING button for 2 seconds or more to standby for pairing. The indicator (blue) and indicator (red) flash together and the unit enters into pairing mode. 10 US Note If pairing is not established within about 5 minutes, pairing mode will be cancelled and this unit will turn off. In this case, start over from step 1.