Sony DRX820U Operating Instructions - Page 9
Busy indicator, Eject button, Emergency eject hole, Disc tray, Power Switch, USB Connector, DC - power cord
View all Sony DRX820U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Introduction A Busy indicator Indicates the drive status. Lit: The drive is reading data, playing back an audio CD, or writing packets. Blinking: The drive is writing data (disc-at-once, track-at-once), formatting a disc, or deleting1) data from a disc. Off: The drive is in a state other than those outlined above. 1) Some drives indicate this state with the lit indicator. B Eject button Press to open and close the disc tray. C Emergency eject hole If you cannot open the disc tray with the eject button, turn off the drive, and then insert a thin, elongated object into this hole to eject the disc tray manually. D Disc tray Insert discs here, label side up. Hint When you insert a disc into the drive, make sure that it is under the four pins. When using the drive vertically, make sure that you set the disc inside the two lower pins. E Power Switch Press to turn the drive on or off. F USB Connector Used with a USB cable to connect the drive to a computer. G DC IN Jack Connect the supplied AC power cord to the AC power adapter. Connect this assembly to the DC IN jack, and then connect the whole to the AC outlet. 9