Sony DSC-HX200V Instruction Manual - Page 26
Soft Skin Effect, GPS Log REC - filter
View all Sony DSC-HX200V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
ND Filter Metering Mode Cont. Shooting Interval Bracket Setting Scene Recognition Soft Skin Effect Smile Shutter Smile Detection Sensitivity Face Detection Flash Level Color Mode Color Saturation Contrast Sharpness Noise Reduction Anti Blink Movie SteadyShot Position Information* GPS Log REC* Register Setting GB 26 Turn the internal ND filter on or off. Select the metering mode that sets which part of the subject to measure to determine the exposure. Select the number of images taken per second for Burst shooting. Set the type of the bracket shooting. Set to automatically detect shooting conditions. Set the Soft Skin Effect and the effect level. Set to the camera automatically release the shutter when a smile is detected. Set the Smile Shutter function sensitivity for detecting smiles. Select to detect faces and adjust various settings automatically. Adjust the amount of flash light. Select the vividness of the image, accompanied by effects. Adjust the vividness of the image. Adjust the contrast of the image. Adjust the sharpness of the image. Adjust the image resolution and the noise balance. Set to automatically shoot two images and select image in which the eyes are not blinking. Set the strength of SteadyShot in Movie Mode. If you change the setting for [Movie SteadyShot], the angle of view will change. Check the GPS triangulating status and update the position information. Record the route taken while carrying the camera. Register the desired modes or camera settings. Set the mode dial to (Memory recall mode) to retrieve the registered settings.