Sony DSC P20 Operating Instructions - Page 66
When POWER SAVE is set to ON, the LCD, USB CONNECT
UPC - 027242592568
View all Sony DSC P20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Item LCD BACKLIGHT Setting BRIGHT x NORMAL BEEP SHUTTER x ON OFF USB CONNECT PTP x NORMAL POWER SAVE x ON OFF DEMO x ON/STBY OFF Description Displayed only when using your camera with the battery pack: Selects the brightness of the LCD backlight. Lets you set the brightness of the LCD backlight to [BRIGHT] or [NORMAL]. Selecting [BRIGHT] makes the screen bright and easy to see when using the camera outdoors or in other bright locations, but also uses up the battery charge faster. Turns on the shutter sound only. (The shutter sound is heard when you press the shutter button.) Turns on the beep/shutter sound (when you press the control button/shutter button). Turns off the beep/shutter sound. Switches the USB mode (page 29). Set to ON to extend the battery life when operating the camera with batteries. When POWER SAVE is set to ON, the LCD screen turns off while the flash is charging (pages 11, 85). Displayed only when you use your camera with the AC power adaptor. [DEMO] is set to [STBY] at the factory and the demonstration starts about 10 minutes after you have set the mode dial to or . To cancel the demonstration, turn off the power. Notes on [DATE/TIME] • The date and time do not appear on the LCD screen during shooting. These appear during playback. • The date and time are not superimposed onto moving images and Clip Motion images. 66