Sony DSC P20 Operating Instructions - Page 74
Turn on the camera., The USB cable is not connected firmly.
UPC - 027242592568
View all Sony DSC P20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Symptom Your camera cannot delete an image. The power turns off suddenly. A file error occurs when you play back a file. The picture is monochrome (black and white). Your personal computer does not recognize your camera. Cause and/or Solution • The image is protected. t Cancel the protection (page 59). • If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the battery (page 11). t The auto-power off function (page 11) is activated. Turn on the camera. • The battery is discharged. t Replace it with a charged battery or new alkaline batteries. • The image size is larger than 1216×912. • The camera is set to TEXT mode. t Cancel TEXT mode (page 47). • P. EFFECT is set to B&W mode. t Cancel B&W mode (page 52). • The battery level is low. t Use the AC power adaptor (not supplied) (page 14). • The camera is turned off. t Turn on the camera. • The USB cable is not connected firmly. t Disconnect the USB cable, and connect it again firmly. Make sure that "USB MODE" is displayed on the LCD screen (pages 31, 33). • The USB connectors on your personal computer are connected to other equipment besides the keyboard, the mouse, and your camera. t Disconnect the USB cables except for the ones connected to the keyboard, the mouse, and your camera. • The USB driver is not installed. t Install the USB driver (page 31). • [USB CONNECT] is set to [PTP] in the setup settings. t Set it to [NORMAL] (page 66). • Since the camera is connected to a computer with the USB cable before installing the USB driver, the drive is not recognized by the computer. t Delete the drive which is not recognized, then install the USB driver. For details, see the procedure on page 76. 74